Friday, February 28, 2014

Whirlpool ultimate care iiwont drain or spin

whirlpool ultimate care II-won't drain or spin


Need help fast! My whirlpool ultimate care II washer is 2 years old. has worked good up until tonight. it filled, agitated, but won't drain or spin. What do i do? I have a washer full of soaking wet towels. many thanks for ANY help Well, I'm no pro, but here's some troubleshooting information in the meanwhile. From this site: http://www.repairclinic.com/0088_11_1.asp#Level2_6 If it doesn't pump water out or spin, check to see if the motor is running, then proceed as follows: If the motor is running, your washer probably has a frozen pump pulley or a broken pump belt. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn't turn freely--if it's frozen or stiff--replace it. If the pump belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt. If the motor isn't running, the lid switch may be defective. If so, the washing machine can't spin and may not function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.








Related Posts:




  • Spin problem kenmore clothes washer 80 series

    spin problem - Kenmore clothes washer 80 seriesGreetings, I searched the archives but didn't find this problem. My washer (Model#110.27812690) suddenly didn't spin the last load. I moved the cycle...


  • Whirlpool imperial series washer spin problem

    Whirlpool Imperial series washer spin problemI have aquired a whirlpool imperial series washer model LSN1000JQ1. It fills washes drains no problem but when it goes into spin it jerks a few times l...


  • Washing machine drain options

    washing machine drain optionsI want to move my washer to an area that has no drain pipe in the floor. There is however the house main 4 pipe and a 2 pipe for the kitchen sink overhead. My question...


  • Whirlpool heavy duty washer wont spin in rinse cycle

    Whirlpool heavy duty washer won't spin in rinse cycleMy Whirlpool heavy duty washing machine, Model LSR7233BW0, does not spin during the rinse cycle when doing loads in the regular and permanent p...


  • Uh oh ptrap for washing machine drain is below the floor

    Uh oh. P-trap for washing machine drain is below the floor.I was doing some repair to some electrical and had to remove a large section of drywall near my washing machine drain. I discovered that...